All of the information you need to properly care and fit your Rosara lighting
All of the information you need to properly care and fit your Rosara lighting
Beam Angle: 120 degrees
Wattage: 1W
Driver required: 350mA
All LED lights require a remote mounted constant current driver. All lights must be installed by a qualified electrician. Fittings must be wired in series. The maximum number of fittings on one driver is 12. Its’ module has a shelf life of 50,000 hours, that’s around 30 years based on average 6 hours use a day.
Please see table below to work out the driver required per lighting circuit.
Beam Angle: 30 degrees
Wattage: 3W
Driver required: 350mA
All LED lights require a remote mounted constant current driver. All lights must be installed by a qualified electrician. Fittings must be wired in series. The maximum number of fittings on one driver is 12. Its’ module has a shelf life of 50,000 hours, that’s around 30 years based on average 6 hours use a day.
Please see table below to work out the driver required per lighting circuit.
Beam Angle: 120 degrees
Wattage: 1.5W
Driver required: 500mA
IP rating: IP67
All LED lights require a remote mounted constant current driver. All lights must be installed by a qualified electrician. Fittings must be wired in series. The maximum number of fittings on one driver is 12. Its’ module has a shelf life of 50,000 hours, that’s around 30 years based on average 6 hours use a day.
Please see table below to work out the driver required per lighting circuit.
Beam Angle: 120 degrees
Wattage: 1W
Driver required: 350mA
IP rating: IP65
All LED lights require a remote mounted constant current driver. All lights must be installed by a qualified electrician. Fittings must be wired in series. The maximum number of fittings on one driver is 12. Its’ module has a shelf life of 50,000 hours, that’s around 30 years based on average 6 hours use a day.
Please see table below to work out the driver required per lighting circuit.
Beam Angle: 30 degrees
Wattage: 1W
Driver required: 350mA
IP rating: IP65
All LED lights require a remote mounted constant current driver. All lights must be installed by a qualified electrician. Fittings must be wired in series. The maximum number of fittings on one driver is 12. Its’ module has a shelf life of 50,000 hours, that’s around 30 years based on average 6 hours use a day.
Beam Angle: 30 degrees
Wattage: 3W
Driver required: 350mA
IP rating: IP65
All LED lights require a remote mounted constant current driver. All lights must be installed by a qualified electrician. Fittings must be wired in series. The maximum number of fittings on one driver is 12. Its’ module has a shelf life of 50,000 hours, that’s around 30 years based on average 6 hours use a day.
Please see table below to work out the driver required per lighting circuit.
Beam Angle: 30 degrees
Wattage: 3W
Driver required: 350mA
IP rating: IP65
All LED lights require a remote mounted constant current driver. All lights must be installed by a qualified electrician. Fittings must be wired in series. The maximum number of fittings on one driver is 12.
Please see table below to work out the driver required per lighting circuit.
Beam Angle: 30 degrees
Wattage: 3W
Driver required: 350mA
IP rating: IP65
All LED lights require a remote mounted constant current driver. All lights must be installed by a qualified electrician. Fittings must be wired in series. The maximum number of fittings on one driver is 12.
Please see table below to work out the driver required per lighting circuit.
Beam Angle: 30 degrees
Wattage: 1W
Driver required: 350mA
IP rating: IP65
All LED lights require a remote mounted constant current driver. All lights must be installed by a qualified electrician. Fittings must be wired in series. The maximum number of fittings on one driver is 12. Its’ module has a shelf life of 50,000 hours, that’s around 30 years based on average 6 hours use a day.
Electrical Driver Info
• All our fittings are 1-3W in a warm white light
• All our LED lights require a remote mounted constant current
driver
• Lights should be connected with waterproof joints (installing
electrician to specify/provide)
• Fittings must be wired in series
• Max number of fittings on 1 driver is 12
To calculate drivers required add up the number of watts per lighting
circuit (group of lights you want to switch on together) and select the
appropriate driver size for the task. All fittings on the same
circuit must require the same size driver i.e. you cannot have lights
that require a 350 mA driver on the same circuit as lights that require
a 500 mA driver.
Drivers | Total no. of Watts of Light Price | Price |
6W 350mA Driver |
1 - 4W |
£25.50 |
12w 35mA Driver |
1 - 10W |
£45 |
18W 350mA Driver |
4 - 15W |
£54 |
12W 500mA Driver |
1 - 7W |
£45 |
26W 500mA Driver |
4 - 15W |
£54 |
Tel. 01869 340 342